Triple-Coated Fluted Anchor

 Description:

Engineered Lining Systems, Inc specifies the use of Triple Coated Fluted Anchors for the mechanical fastening of the Engineered Lining System on Duro-Coated are for protection against the harsh environment.

 

Installation:

Triple Coated Fluted Anchors are designed to be driven into a pre-drilled hole made by a 3/16 inch (5 mm) masonry drill bit, 1 ½  inches deep minimum. A 1 inch penetration is required into the concrete.  A Stress Distribution Cap is required for each Triple Fluted Anchor, unless the Triple Coated Fluted Anchor is being used with Stress Distribution Bar.